*We strongly recommend getting a proper ring sizing at a reputable jeweler/jewelry counter local to you before purchasing.
*We DO NOT recommend online printable paper ring sizers. They are too subjective and inaccurate.
*Even if you are correctly sized by a jeweler, when purchasing online there is still the possibility of sizing differences (one of the drawbacks of our not being able to check your ring size personally). We offer the sizing exchange policy for this reason.
*Please be sure to mention that you want to be sized for a comfort fit ring and keep in mind the width of the ring you are purchasing (wider width ring can sometimes feel more snug).

What sizes do you offer?

In Titanium and Stainless Steel:
US Sizing: Our standard size range from 4-16 including whole, half and quarter sizing (for example, yes, we can make size 7.75)
International Sizing: We can convert to US sizing for most sizing systems (ie: European (letter) sizing) Just ask!

In Tungsten: All of our tungsten rings are available in select whole or half sizes as indicated in the listing details. Because we do not make our tungsten rings, we cannot accommodate individual or unique size requests.

What widths are available?

Titanium and Stainless steel:Each ring style (AX#) is available in set width options to maintain design integrity. Please ask or read auction listing closely before bidding as we will not accept requests for non-standard widths.
2mm-9mm are standard widths with standard pricing.
10mm-12mm widths are custom widths with custom width pricing.

Our widths are noted in mm. For your convenience, use this chart for conversion from mm to inches
2mm = just over 1/16"
3mm = just over 3/32"
4mm = just over 1/8"
5mm = 3/16"
6mm = just under 1/4"
7mm = just over 1/4"
8mm = 5/16"
9mm = just under 3/8"
10mm = just over 3/8"
11mm = 7/16"
12mm = just under 1/2"

Tungsten: Our tungsten rings are available in the width noted in the listing details. Because we do not make our tungsten rings, we cannot accommodate custom width requests.

Tell me about your finish options for titanium or stainless steel.

The good news: titanium is a strong metal. It should not bend or thin over time, it is tough. It will not tarnish or turn your finger colors.
The bad news: the finish is not scratch-proof.
Often buyers think that because titanium is a strong metal it is also resistant to scratching to the finish. This is just not the case.
Your ring will get scratching READILY with just normal daily wear.
For most, the scratching is a minor issue, for some, not so much.
We know that titanium is not for everyone, so please be sure to make an informed decision prior to purchase.

SATIN: a very light textured matte finish
BRUSHED: a medium textured matte finish
STONE: a rough (but not rough to the touch) textured matte finish (stone finish is the best of the matte finishes at holding up to daily wear)
FROSTED: a unique, luminescent textured finish that gives the titanium a slightly more shimmery appearance and a bit of sparkle or bling (one of the better finishes at holding up to daily wear). IMPORTANT NOTE: The frosted finish is still gray, it is not a white finish and the luminescent sparkle is most prominent in the direct light/sunlight and on the wider rings. Please be reasonable in your expectations.
POLISHED: smooth - mirror like. The polished finish is easiest to touch up at home using a mag wheel polish (available at automotive stores) and any buffing cloth from time to time)
SANDBLASTED: just as the name implies, a blast of sand is applied to the ring giving it a slightly darker or muddier gray look with a unique texture. Sandblasted finish is not a heavy texture.
Sandblasting is prone to scratching to the finish and will show scratching almost immediately with daily wear. But please note that the scratching to the sandblasted finish does not wear off the sandblasting and this finish will eventually wear to more smooth/glossy over time. Some have told us they prefer the look of worn sandblasting over the freshly sandblasted look.
BURNISHED: Gives the ring a nice muted gray textured look. DURABLE finish that holds up the absolute best of any of our finishes to daily wear, seriously, this finish is tough. Burnished finish is currently only available on styles AX11, AX16 and AX118.
GOLD/SILVER INLAY RING STYLES: At this time we are not able to offer the all polished finish on any of our inlay ring styles.
We find that the inlay metal for our gold inlay rings can vary just slightly in color and intensity from batch to batch as ordered for our stock so photo color may vary, but we always use solid 14k gold inlay wire.
White gold will still have a slight yellowish hue to the metal but is more muted than yellow gold.
Yellow gold is a deeper richer gold/yellow color.
Pink gold we find tends to look a bit copper in color.
If you want a picture of the different inlay metals side by side, let us know and we will send that.
If you have any questions about inlays, please ask before purchasing so you can be sure before you purchase given these rings are considerably more in price.

Tungsten rings finishes:

The finish shown in the photo on the tungsten ring listing is the only one available for that style.