MEASURING GUIDE - ROLLER BLINDS
Firstly decide whether the blind(s) will be fitted inside the window recess or on the outside.
INSIDE RECESS
 FOR INSIDE RECESS FITTING YOU WILL NEED TO TAKE THE FULL RECESS MEASUREMENT FROM WALL TO WALL AND ORDER BLIND AS ’RECESS SIZE’.
USING A METAL TAPE MEASURE TAKE FIRSTLY THE WIDTH AND THEN THE DROP MEASUREMENTS IN 3 PLACES ( AS SHOWN). ORDER AS THE SMALLEST MEASUREMENT AND WE WILL MAKE THE NECESSARY ADJUSTMENTS.
OUTSIDE RECESS
 FOR OUTSIDE RECESS FITTING YOU WILL NEED TO MEASURE THE EXACT AREA YOU NEED THE BLIND TO COVER (WE RECOMMEND ALLOWING AT LEAST 50MM COVERAGE ALL AROUND THE WINDOW) AND ORDER AS ’BLIND SIZE’.
MEASURE THE WIDTH THEN DROP REQUIRED ALLOWING FOR THIS OVERLAP.
ADDITIONAL INFORMATION
THE FABRIC ON ROLLER BLINDS WILL BE APPROX 35MM NARROWER THAN THE OVERALL BLIND WIDTH TO ALLOW FOR END CONTROLS AND BRACKETS.
BLINDS ARE OPERATED BY A SIDEWINDER CHAIN - PLEASE SPECIFY IF YOU WOULD LIKE THIS ON THE LEFT OR RIGHT HAND SIDE. WHITE METAL BRACKETS SUPPLIED ARE UNIVERSAL TOP, FACE OR SIDE FIX.
FOR FURTHER ADVISE PLEASE CALL TYNE BLINDS 0191 491 3998 | 
) 
