Bread Crumb Link
Welcome to the Official Smart Moto Electronics eBay Store
We Ship Worldwide!
products products

Oxygen Sensor Eliminators

The o2 sensor is an electronic sensor located inside the exhaust and it is used to determine if the Air/Fuel ratio of an engine is rich or lean. The o2 sensors of all motorcycles are limited to catch the emission standards and in some specific throttle positions will try to lean or richen the mixture to catch the stoichometric Air/Fuel ratio. This is good for the emissions but not for the performance and smoothness of the engine.

With the elimination of the sensor:

  • • Improve throttle response, with smoother power delivery and more torque available
  • • Support FI mods like the Power Commander and other mods the require the elimination of the sensor
  • • Use an aftermarket exhaust that doesn't have a hole for the o2 sensor
  • • Disable a faulty o2 sensor

Visit Oxygen Sensor Eliminators in our shop

Back to Product List

Steering Damper Eliminators

Removing the stock electronic Steering Damper off your motorcycle and disconnecting it from the wiring harness enables the FI light and the error code on the dash

With the installation of the product:

  • • Remove the stock electronic steering damper so you can install any aftermarket damper
  • • Bypass the error codes of a faulty steering damper sensor

Visit Steering Damper Eliminators in our shop

Back to Product List

Servo/Exup Valve Eliminator

The exhaust valve system is used by the manufacturers to lower the noise levels of the exhaust and to control torque in the low RPMs. The exhaust and the servo motor system is incompatible with race cans and full exhaust systems because it is part of the standard exhaust.

SmartMoto has created a new Servo eliminator that has the most compact design available in the market. We do not use wires and we enclose the circuit and connectors together in one box. Also, we give special attention to durability; we enclose the whole product into special high grade resin like the most motorcycle manufacturers do in similar applications.

With the installation of the product:

  • • Remove the exhaust valve and servo motor without switching the ECU to SAFE mode
  • • Replace a faulty servo motor or exhaust valve
  • • Install a full exhaust system without enabling the Fi light
  • • Give maximum torque at the low RPMs
  • • Reduce weight and free up space by removing the servo motor, exhaust valve and cables
  • If you disconnect the Servo motor from the wiring harness, the ECU will recognize it and you will get an FI malfunction code, our electronic Servo Exhaust Valve Eliminator will fool the ECU that the Servo motor is in place.


Visit Servo/Exup Valve Eliminator in our shop

Back to Product List

CoolAIR Radiator Fan Switch

Our CoolAIR switch is a smart manual radiator fan switch. It connects to the radiator temp sensor with OEM sealed connectors and use the standard radiator fan to prevent the rising of the engine temperature.
When you ride at low speeds or when waiting on traffic you only need to turn the switch on to keep the engine temperature at low levels.
The CoolAIR switch has intelligent design and even when it is turned off it maintains the standard radiator fan operation, the fan will be turned on normally when the coolant temperature reach the pre-set level.

Installation is very easy,
The CoolAIR switch comes with fully waterproof installation kit and can be fixed through a 6mm hole on the motorcycle or at any fixed point with a cable tie.
It is connected directly to the wiring harness with OEM sealed connectors that fit to your motorcycle.

Product characteristics:

  • • It keeps the engine temperature at the standard level and protects the engine from overheating on traffic.
  • • Perfect when working on your motorcycle and you require it to work on idle like on TPS adjustment.
  • • Intelligent design that keeps the standard radiator fan operation when the CoolAIR switch is turned off.
  • • Connect with OEM sealed connectors, plug and play installation, no wire cutting required
  • • It has completely waterproof design and comes with waterproof installation kit

Visit CoolAIR Radiator Fan Switch in our shop

Back to Product List

Suzuki Dealer Mode Switch

We list two models of the switch with the 4 way and 6 way connector to cover all Suzuki models.

With the installation of this product:

  • • Display the ECU error code on the LCD screen when the FI light is lighting
  • • Display the memorized ECU error codes on the LCD screen
  • • Adjust the throttle position sensor.

Our dealer mode tool comes with new waterproof design!
The tool can be fixed permanently on the motorcycle with our fully waterproof installation kit through a 6mm hole on the fairings or at any fixed point with a cable tie.
The tool connects to the wiring harness with a completely sealed connector.

Visit Suzuki Dealer Mode Switch in our shop

Back to Product List

Side Stand Switch Eliminator

The most of the newer motorcycles come with a side stand switch to cut the ignition when the side stand is open. In some situations it can cut the ignition when you go over bumps with your enduro or supermoto or you go off-road with your motorcycle, also it wont let you start the engine if you have removed the side stand for trackday use.

With the installation of this product:

  • • Remove the entire side stand for trackday or off-road use and reinstall it again quickly when you need to go back to road.
  • • Support FI mods like the Power Commander and other mods the require the elimination of the sensor
  • • Eliminate a faulty side stand switch

Visit Side Stand Switch Eliminator in our shop

Back to Product List

PAIR/SAS/AIS Removal Kits

The PAIR system feeds fresh air into the exhaust to aid in the combustion of unburned fuel. The system was designed to improve emissions, but it will cause problem with race cans or many aftermarket cans.

With the elimination of the system:

  • • Fix the exhaust popping on deceleration and backfiring with aftermarket cans
  • • Achive true A/F ratio for autotune and mixture adjustment
  • • Free up engine space
  • • Improve throttle response with aftermarket exhaust such as the Acrapovic exhaust system
  • If you disconnect the PAIR valve from the wiring harness the ECU will recognize it and you will get an FI malfunction code, our electronic PAIR valve eliminator will fool the ECU that the valve is in place.


Visit PAIR/SAS/AIS Removal Kits in our shop

Back to Product List

Smart TRE ATRE

Suzuki have retarded the ignition timing of the first 4 gears on the most of its latest models. This restriction is applied by Suzuki to limit the available torque in low speeds for road safety.

Our Smart TRE bypasses this restriction and gives the optimal map to all gears for maximum performance.
The Smart TRE will also disable the speed limiter to all 1000cc+ models

Product characteristics:

  • • Bypasses the Timing Restriction of the first 4 gears
  • • Does not affect Neutral like the cheap TRE versions
  • • Plug and play design, no wire cutting required
  • • Compatible with the Power Commander and the Bazzaz Z-Fi
  • • Disables the Speed limiter on all 1000cc+ models
  • * Customer reviews have shown improved power delivery and stronger overall accelerations with the product installed

Visit Smart TRE ATRE in our shop

Back to Product List