| - T shirt paper printing instructions
|
|
|
|  |
|
| |  |
To create colourful images on to T shirt or fabric materials, using your inkjet printer.
Printing Instruction - Print on white plane side.
Printer Setup
* HP – Iron on paper (can be found under special paper)
* Epson – Plain paper, tick flip horizontal to create a mirror image.
* Canon – Iron on / T shirt paper
* Lexmark – Iron on
Please note the image has to be printed in mirror mode in order to get it right way on the T shirt. The ‘iron on’ or T shirt mode are creating the mirror image automatically.
Ironing Instructions
1. Use hot iron with a min 1200w, set to highest temperature
2. Use only light colour or white T shirt / fabric.
3. Lay the T shirt on to a stable, hard surface, such as a work top or a strong table. DO NOT USE IRONING BOARD.
4. Place the T shirt you want to print on, on another T shirt or a pillow case.
5. Cut the transfer paper around the image, leaving maximum of 1-2 cm margin around the image.
6. Pre iron the T-shirt in the area you want to apply the transfer.
7. Place the transfer paper with the image facing the T shirt.
8. Iron the transfer paper all over for a few seconds to fix it on to the T shirt and then iron systematically in small cycles every part of the transfer, spending 5-10
seconds in each position. Applying maximum pressure.
9. A full A4 should take at least 2 minutes.
10. Peel off the backing material.
11. To remove glossiness of the image, please lay a normal plain white sheet of paper on to the image and iron it for 10-15 seconds all over. Then peel off the paper immediately.
Washing Instructions
1. Turn T shirt inside out.
2. Maximum temperature 40°c
3. Full spinning.
4. Avoid using washing powder containing bleaching materials.
|
|
|
Basket
) 
