VYSAL ®
UNDERFLOOR HEATING SYSTEMS
Electric Underfloor Heating Mat
Suitable for any room in the house – including bathrooms and Wet Rooms!
VYSA-MAT ® Underfloor heating mats are manufactured to the European standard IEC335/EN60335 which recommends that a heating mat with a rating of no more than 100W/m² should be installed onto a timber sub-floor.
Concrete floors absorb heat at a higher rate than timbers floors, therefore VYSA-MAT ®Underfloor heating mats with higher output ratings – 150W/m² to 200W/m² are available to compensate for this. Well insulated constructions to the latest requirements of the building regulations need less powerful heating mats than those built to the requirements prevailing when the building was constructed.
VYSA-MAT ® offers a LIFETIME Guarantee.
Choose your mat:
Choose the nearest size required for the area to be heated, buying one size lower (mats cannot be cut down).
|
Wooden/Timber Sub Floors - 100W/m² |
|
Order Code |
Heated Area |
Heating Load |
Price (inc.vat) |
|
2434 |
0.6 m² |
60W |
£30.00 |
|
4000 |
1.0 m² |
100W |
£33.75 |
|
4001 |
1.5 m² |
150W |
£44.50 |
|
2374 |
1.8 m² |
180W |
£48.74 |
|
2375 |
2.2 m² |
220W |
£53.65 |
|
2376 |
2.9 m² |
290W |
£64.00 |
|
2377 |
4.1 m² |
410W |
£78.56 |
|
2382 |
4.7 m² |
470W |
£91.98 |
|
2378 |
5.6 m² |
560W |
£101.75 |
|
4007 |
6.0 m² |
600W |
£120.00 |
|
4008 |
7.0 m² |
700W |
£150.00 |
|
2379 |
8.2 m² |
820W |
£175.00 |
|
4010 |
9.0 m² |
900W |
£204.17 |
|
2384 |
11.8 m² |
1180W |
£225.00 |
|
2385 |
17.9 m² |
1790W |
£345.55 |
To choose your mat, click on the link below and select the mat best suited for your area. Choose the mat one size below your total area. Mats can not be cut down:
http://stores.ebay.co.uk/Perfectheat/Underfloor-Heating-Mats-x-Timber.html
Thermostats:
You will also need to order a thermostat to go with your mat. You can find these in our Ebay shop, or click on the following link:
http://stores.ebay.co.uk/Perfectheat/Thermostats-/_i.html?_fsub=8009489&_sid=443736950&_trksid=p4634.c0.m322
Insulation:
Current Building Regulations stipulate requirements for floor insulation but you can never provide too much insulation! Running costs of the heating system are determined by the room or dwelling’s heat loss so any expenditure on insulation will be repaid many times over. We recommend that you regard Building Regulation requirements as the ‘bare minimum’ and install additional insulation. We supply VYSAPRON ® Thermal Insulation Boards and VYSAPRON ® Insulated Tile Backer Boards available in sheet form with a K value (thermal conductivity) of 0.029W/m°K.
These are available from our Ebay shop.
Click on the link below:
http://stores.ebay.co.uk/Perfectheat/Insulation-/_i.html?_fsub=8009663&_sid=443736950&_trksid=p4634.c0.m322
Electrical Requirements:
The heating elements are simple to install by following the comprehensive installation instructions.
· The final electrical connections should be made by a qualified electrician in accordance with the current regulations.
· All installations require a 30mA RCD (residual current device) for safe operation.
· Thermostats are now permitted to be installed in a bathroom outside of Zone 2 under 17th Edition rules. Refer to section 701-753 of BS 7671:2008 for further details.
Unsure of what size you need?:
If you are unsure which mat you require, please contact us and we will tell you what the best size is for you.
Delivery charges:
FREE DELIVERY to all UK Mainland Destinations.
| 
Basket
) 
