Skip to main content
Popular products
No suggestions.
Hide eBay suggestions
Advanced
Bread Crumb Link
Save this seller|Sign up for Shop newsletter
NickerStickers Custom Decals

NickerStickers Custom Decals

Maintained by:
Member ID nickerstickers ( Feedback score of 15319Yellow shooting star icon for Feedback score between 10,000 to 24,999) About member eBay Shop
We are a full print shop using the finest materials with all the artwork created by our in-house artists for the most unique custom decals. What you see here is a small sample of our product line.

Shop categories

Shop home

Shop pages

  • Decal Applicatio​n
NickerStickers Decal Application Applying a NickerStickers window decal is as easy as 1-2-3! Check out our video.

Click to view:
Video~Decal Application

How to Apply Decals

You can see a video of how to appy our decals at this link: NickerStickers Video On How to Apply a Decal

First of all, lets determine what kind of sticker you have. If your decal can easily be peeled off,
this is your standard peel-and-place sticker. If it has a clear layer on top of it, that's a vinyl-transfer die-cut decal.
Scroll down for directions on how to apply both kinds of decals.

Caution: Only apply decals and transfers when the surface temperature is
40-80 degrees Fahrenheit (15-26 Celsius)

 

Peel-and-Place Sticker
Tools Required:alcohol, soapy water, credit card, and a pin.

  1. Remove all dirt and oil from the area where the decal will be placed. Alcohol works great.
  2. Wet the area with a small amount of soapy water.
  3. Peel the backing paper off of our decal.
  4. Place the decal on the soapy area starting at one end and slowly rolling the decal onto to the surface.
  5. Slide your decal into the position you want.
  6. Rub thoroughly with the edge of a credit card, starting at the center working outward, pushing the soapy water out. Continue until your decal is firmly stuck in place.
  7. Pop any bubbles that are left with a pin.

To remove your decal, use citrus cleaner, lifting a bit of the decal and spraying under it as you go. Be patient and go slow! The citrus cleaner will help to neutralize the adhesive and make it easier to get your decal off and the surface clean.

 

 

Vinyl Die-Cut Decal Transfer
Tools Required: Alcohol, x-acto knife, credit card and a pin.

  1. Clean the area where the decal will be placed. Alcohol works great.
  2. The decal will be visible thru the transfer paper. SLOWLY separate and peel the protective backing paper from the transfer paper which carries the graphic. Keep an x-acto knife handy, as your decal may want to stay stuck to the backing paper. In that case, use your knife it to help lift away the edge of the graphic from backing paper, then rub the transfer tape on that area again before continuing on.
  3. Slowly roll the transfer paper with exposed graphic onto the surface and begin to lightly rub down vinyl EVENLY from CENTER, from top to bottom until you reach the end.

    This is your big opportunity to avoid bubbles and creases by going SLOWLY and applying EVENLY!!!

  4. Rub down firmly with fingers.
  5. Now use the credit card to slowly but firmly rub graphic onto the surface, so that transfer paper will separate from graphic.
  6. SLOWLY pull away transfer paper at a sharp angle, (because it will want to resist!)
  7. Pop any bubbles that are left with a pin.
  8. Use left-over piece of backing paper to shield your vinyl from direct contact with credit card to rub out bubble or even out crease.

 

 If you have any questions, please contact us.

 

 

Enter your text here to display on your page