FEATURES:

High static friction coefficient. Good abrasive resistance. High braking power to 500°C. The sintered friction material is soldered to the copper coated backing plate, so Separation (which can happen with organic material) is virtually eliminated as a Failure risk. Low abrasive interaction with the brake rotor material. Three(3) times +/- longer operational life compared to organic and Kevlar composite Materials.

MATERIAL OPERATING PARAMETERS:

Specific pressure: P < 3.0 Mpa. Sliding speed: V < 40m.s-1 Constant maximum temp.: 400 °C Short time maximum temp.: 600 °C   NOTES : Replacement of brake pads should be done in dry clean conditions. If the friction material Comes into contact with oil or brake fluid and the liquid soaks into the pores of the friction Material, a catastrophic fall in friction coefficient (braking performance) could occur. Braking performance is significantly influenced by the quality of the braking surface of the Disc rotor, by the age and quality of the brake fluid, and by the correct choice of Complementary friction pad material.

These brake pads you will find listed in our shop at an un-beatable price of £12.49 per caliper.

Please specify Manufacturer, model and if possible chassis number to ensure speedy delivery of the correct pads for your bike.

We also have an extensive stock of Spark plugs, Chains and sprockets, Engine Oil, fork oil, Forks seals, Oil and air filters. Anything and everything you could possibly need for your motorcycle.

All part delivered within 48hrs unless otherwise specified.

We also supply batterys for all makes and models prices ranging from £19.99 to £34.99. You can call us on 01782 862200 for further information.