| | | | | | | - Kawasaki ER6n Install Instructions
| |
|
|
|  |
|
| Installation of the Frame Sliders / Engine Protectors for the 2009 Kawasaki ER6n is very simple and straightforward but the left hand
engine slider can be a little tricky so I put the following
instructions together to speed things along:
First thing to do after you've removed the small fairing is remove the horn:
You'll want to remove the bracket that connects the frame to the engine:
Attach the bracket to the slider like this with the Allen bolt
and spacer (But do NOT put the nut on the bolt):
Re-attach bracket plus slider to the frame and engine like this:
Make sure the spacers are installed as shown in the picture above.
Here's where that nut goes:
Finally reattach the horn like this:
You're good to go!
Hope these pictures and instructions make sense.
Please let me know if you have any questions.
Let the Good Times ROLL!
 AsianConnection71
P.O. Box 71
Ladkrabang Post Office
Ladkrabang, Bangkok 10520
THAILAND
email: sales@asianconnection71.com (sales at asianconnection71 dot com)
Mobile: 0868052274
Office / FAX: 021754239
Skype: marc.nisam
http://stores.ebay.com/AsianConnection71
 |
|
) 
